Ricardo R6105ZP Diesel Engine

R6105ZP diesel engine overview

Alexerpower lists the Ricardo R6105ZP as an in-line, six-cylinder, turbocharged diesel engine for mechanical drive enquiries. The existing technical listing specifies 84 kW at 1500 rpm. Discuss the required engine duty and clutch, pulley or PTO connection so the quoted assembly can be checked against your equipment.

Confirm the exact engine nameplate, rating definition and supplied accessories in the quotation. Engine shaft power is different from the electrical output rating of a complete generator set.

Published R6105ZP specifications

The table below reorganizes reference data from Alexerpower’s existing product listing. Request the current R6105ZP data sheet, rating conditions and installation drawing before purchase.

Displacement, compression ratio, firing order, torque and overall dimensions should be obtained from the current model-specific documentation. The existing page does not provide a consistent basis for presenting these as confirmed R6105ZP values.

Clutch, pulley, PTO and accessory options

Specify how the engine will connect to your driven equipment. Provide shaft and mounting dimensions, required output speed, rotation direction, coupling or pulley arrangement and clutch requirements.

• Output assembly: discuss the clutch, belt pulley or PTO shaft needed for the project; confirm the included components and guards.
• Fuel and controls: fuel tank and automatic controller options are listed. Confirm capacity, control functions and scope of supply in the quotation.
• Cooling package: the listing describes a radiator, belt-driven fan and safety guard, with a stated 40°C maximum. Request the ambient-temperature, ventilation and installation conditions of the quoted package.
• Filtration and electrical equipment: dry-type air, fuel and oil filters are listed. Confirm the starter, charging equipment, battery requirements and supplied accessories.

Product photos: the existing gallery images are labelled R4105ZP. Ask for current R6105ZP photos and a nameplate image; shared photos do not establish that two engine models are interchangeable.

R6105ZP diesel engine FAQ

What is the published power output of the R6105ZP?

The existing technical listing gives 84 kW at 1500 rpm. Request the current data sheet to confirm whether that rating and its permitted duty apply to the exact engine assembly and site conditions in your quotation.

Can I order a version for 1800 or 2000 rpm?

These speeds appear in the original general description, but the published technical power value is tied to 1500 rpm. Request an approved speed, corresponding power rating and governor specification for any other operating speed.

Can it be supplied with a clutch, belt pulley or PTO?

Discuss the output assembly when requesting a quotation. Send the driven-equipment load, speed, connection dimensions and mounting drawing so the proposed arrangement can be checked.

What is the R6105ZP displacement?

Request the displacement from the current R6105ZP data sheet and confirm the engine nameplate. The original page contains inconsistent cylinder, bore/stroke and displacement information, so a replacement displacement value has not been assumed here.

What does the fuel consumption figure mean?

The published reference is ≤231 g/kW·h, a specific fuel-consumption figure. It is not a fixed litres-per-hour value at every load. Ask for the test conditions and consumption data at your intended operating point.

Are R6105ZP and R4105ZP interchangeable?

Do not assume interchangeability from the shared gallery or similar names. Compare the actual nameplates, power and speed ratings, cylinder configuration, dimensions, cooling package and output connection before selecting an engine or replacement part.

Information for engine selection and quotation

1. Application, preferred model, destination and quantity.
2. Required shaft power, operating speed, starting or peak load, load pattern and operating hours.
3. Clutch, pulley, PTO or coupling dimensions, mounting drawing and rotation direction.
4. Site temperature, altitude, ventilation and cooling arrangement.
5. Required controls, accessories and project documentation.

For pump, compressor or other machinery enquiries, include the driven-equipment data sheet. For a generator project, specify the required electrical output, frequency and alternator arrangement. Request the applicable emissions documents, warranty terms and delivery lead time for the quoted version.

Request an R6105ZP diesel engine quotation

Send your equipment requirements to Alexerpower / Weifang Junwei Machinery Co., Ltd. Ask for the exact model specification sheet, current engine photos, installation drawing and a quotation listing all supplied accessories.

Request an R6105ZP quotation · sales@alexerpower.com · WhatsApp +86 151 6954 2396 · Call our sales team

Browse the clutch engine range, R4105ZP diesel engine page and two-cylinder diesel engine range for other enquiries. Compare confirmed configurations before choosing an alternative.