Ricardo R4105ZP diesel engine with a published 56 kW at 1500 rpm shaft-power rating and a listed four-cylinder, turbocharged configuration.
The general listing also mentions ZH4105ZP. Confirm the exact supplied model and its specification in your quotation.
Alexerpower lists the Ricardo R4105ZP as a four-cylinder, water-cooled, turbocharged diesel engine with direct injection. The published technical data gives 56 kW at 1500 rpm and a displacement of 4.33 L. Use the exact engine model, rating and output connection when discussing a mechanical drive project.
The general description also refers to ZH4105ZP. Confirm the nameplate and specification of the actual engine assembly in the quotation; the model names alone do not establish interchangeability.
The table reorganizes reference data from Alexerpower’s existing product listing. Request the current model-specific data sheet and rating conditions before purchase.
| Parameter | Listed specification |
|---|---|
| Engine model | R4105ZP |
| Engine type | Four-stroke, in-line, water-cooled, direct-injection diesel |
| Cylinder count | 4 |
| Bore × stroke | 105 × 125 mm |
| Displacement | 4.33 L |
| Compression ratio | 16:1 |
| Firing order | 1-3-4-2 |
| Air intake | Turbocharged |
| Published rated power | 56 kW at 1500 rpm; confirm the rating definition and permitted duty |
| Maximum no-load speed | ≤1575 rpm; confirm the governor specification for the selected version |
| Minimum stable no-load speed | ≤600 rpm |
| Mean effective pressure | 1034 kPa |
| Specific fuel consumption | ≤231 g/kW·h; request the test conditions and load point |
| Specific oil consumption | ≤1.63 g/kW·h; confirm the applicable test conditions |
| Listed exhaust temperature | ≤650°C; request the applicable measurement conditions |
| Crankshaft rotation | Counterclockwise, viewed from the power output side |
| Cooling | Forced water cooling |
| Lubrication | Combined pressure and splash lubrication |
| Starting | Electric start; confirm the complete starting package |
| Charging equipment | 24 V charging alternator listed; confirm the supplied electrical package |
| Listed weight | 600 kg; confirm the weight and scope of the quoted assembly |
The general description mentions 1500, 1800 and 2000 rpm, while the technical power value is specified at 1500 rpm. Request an approved power rating, duty and governor specification for a different operating speed. Engine shaft power should not be treated as the electrical output rating of a complete generator set.
Provide the driven-equipment data and installation drawing so the proposed engine and output assembly can be checked together.
The stated radiator maximum in the existing listing is 40°C. Request the ambient-temperature and ventilation conditions for the quoted cooling package before applying it to your project.
The existing technical listing specifies 56 kW at 1500 rpm. Confirm the rating definition, permitted duty, site conditions and supplied engine version in the current data sheet and quotation.
These speeds appear in the general listing, but the detailed power and no-load speed data should not be assumed to apply unchanged. Ask for the approved speed, corresponding power rating and governor specification for the version you need.
The original general description lists both names. Confirm the actual engine nameplate, manufacturer data, rating and installation dimensions rather than treating the names as proof of equivalent configurations or interchangeable parts.
Yes, these output-connection requirements can be included in your enquiry. Send the equipment load, operating speed and connection drawing, and confirm the exact assembly and included accessories in the quotation.
The published reference is ≤231 g/kW·h, expressed as specific fuel consumption. It is not a fixed litres-per-hour value for all loads. Request consumption data and test conditions for your intended operating point.
The existing information does not identify a specific emissions certificate or warranty period. Request the documents and commercial terms applicable to the exact engine model and project destination before ordering.
For pumps, compressors or other machinery, include the driven-equipment data sheet. For generator enquiries, specify the required electrical output, frequency and alternator arrangement. Ask for the complete engine specification, current photos, installation drawing, warranty terms and delivery lead time.
Contact Alexerpower / Weifang Junwei Machinery Co., Ltd with the information above to discuss the R4105ZP engine and output assembly for your equipment.
Request an R4105ZP quotation · sales@alexerpower.com · WhatsApp +86 151 6954 2396 · Call our sales team
Browse the clutch engine range, R6105ZP diesel engine page and two-cylinder engine range for other enquiries. Compare confirmed model data before choosing an alternative.
China Gas Generators & Engines Factory
We will contact you within 1 working day, please pay attention to the email with the suffix “@alexerpower.com”.
